Q.01
Who maintains the grease device in a leased building?
The lease decides. Many Arcadia leases put the device on the tenant, and some put structural repairs on the landlord. Read the maintenance clause before authorizing work.

Phoenix district · Arcadia
You need grease trap cleaning in Arcadia, Phoenix, and city code calls for a trap pump-out at least every 30 days. Tell us the device and the last pump-out date, and someone from our team will call you back.
Form open 24/7
Get a call back
Phoenix + 15 Valley cities
Arcadia is a residential district with a restaurant scene built into it, and that shapes the grease work. A kitchen may be in a converted house with a small lot, a detached garage turned into a prep area, or a small commercial building on Indian School Road. The grease device is usually underground in the parking area or in a utility closet, and the access is tighter than a purpose-built restaurant.
Phoenix rules apply: a hydromechanical trap every 30 days and never more than 90, a gravity interceptor every 90 days, the 25 percent limit, and 3 years of records at the facility. The Arcadia version of that is a device that is often correctly sized and poorly documented, in a building where the landlord and the tenant disagree about who maintains it.
01 / Good to know
A house converted to a restaurant goes through a tenant improvement permit, and the grease device is part of that scope. What often happens is a small interceptor sized to the fixture count at the time, followed by a menu that adds a fryer and a dishwasher later.
The result is a device that is legal on paper and undersized in practice. The tell is a fill rate above 10 percent a month, which puts the tank at 25 percent before the 90 day mark. A measurement at 2 consecutive pump-outs is enough to see it.

02 / Good to know
Arcadia's restaurants lean on patios for much of the year and lose a large share of covers in July and August. The grease load follows the covers, so a device that is comfortable in the winter can look over-scheduled in the summer.
Do not stretch the interval in the slow season. The city calendar still applies, and the device still accumulates. The better move is to keep the interval and use the quiet months to do the line jetting and the repair that the busy months deferred.
03 / Good to know
04 / Costs
Pricing follows the national ranges on the cost page. A 1,000 gallon interceptor at 4 visits is $900 to $1,600 a year. A 50 gallon trap at 12 visits is $1,500 to $2,400. Long hose runs and shared parking add time, which shows up at the top of the range.
05 / Good to know
Three things: the fixture count, the line size and the lid access. A converted house can gain a dishwasher and a prep sink without anyone re-running the device calculation, and the trap that was fine for a coffee shop becomes a monthly emergency. The fix starts with a fixture count and a measurement, not with a bigger truck.
Rule card · Phoenix City Code 28-15
Service area map
Arcadia and the areas around Phoenix
The map shows Arcadia and the address in Phoenix. Use the buttons below it to open any area page.
All areas06 / 4 questions
Still have a question?
Send the form with a short note. Someone from our team will call you back soon.
Get a call backQ.01
The lease decides. Many Arcadia leases put the device on the tenant, and some put structural repairs on the landlord. Read the maintenance clause before authorizing work.
Q.02
Only a fixture count and a measurement can answer that. If the fill rate is above 10 percent a month, the device is working harder than it should.
Q.03
Yes, if there is room for it and the drain lines can reach it. The alternative is a larger hydromechanical trap, which needs a monthly schedule.
Q.04
3 years at the facility under Phoenix City Code 28-15.

Form open 24/7
Ask for a call back about your grease trap
Tell us which device and which kitchen. We will call you back shortly.
Thank you. You will be called back soon.