Gloved hand scrubbing the dark baffle plate of an open trap with a yellow brush, terracotta tile floor beside it

Phoenix guide · 3 min read

How To Compare Grease Trap Quotes

You have a question about a grease trap in your Phoenix kitchen. The answer is below. When you want a pump-out, ask for a call back.

The cheapest quote in a stack of 3 is usually the one that excludes the most work. It is not a scam, it is how the industry prices: a pump-only visit is faster than a full cleaning, and a per-gallon rate without the disposal fee looks lower than a flat rate that includes it. The same checklist works for commercial grease trap cleaning and for grease interceptor pumping.

The fix is a checklist. Put every quote on the same 8 fields, then compare.

01 / Good to know

The 8 fields

FieldWhat to look for
DeviceType and rated capacity in gallons or GPM
GallonsVolume to be removed, or the per-gallon rate and estimate
Walls and bafflesIncluded, or an extra line item
CompartmentsAll compartments, not just the first
ManifestIncluded, with the gallons and disposal site
Disposal siteNamed, not "a permitted facility"
Service windowScheduled, after hours, weekend
TotalThe number that will be invoiced

If a quote is missing 3 or more fields, the quotes cannot be compared line by line. The missing fields are where invoices usually change.

02 / Good to know

Flat rate versus per gallon

A flat rate is predictable and easy to budget. A per-gallon rate is transparent and adjusts to the actual volume. Both are legitimate, and both can be compared once the gallons are known.

The trap with a per-gallon quote is the minimum. For example, a quote at $0.40 per gallon with a 1,000 gallon minimum on a 500 gallon tank is really a $400 flat rate. The trap with a flat rate is the definition of a full pump: a flat rate that assumes 500 gallons on a 1,000 gallon tank is a partial pump at a full price.

The volume the price assumes, and the charge if the tank is fuller, decide the final invoice.

Worker in navy work clothes guiding a thick black vacuum hose into an open ground-level access beside a tan block wall, a stainless tank truck parked behind him

03 / Good to know

The red flags

  • A quote with no device size and no gallons cannot be matched to another quote.
  • A price far below the local market often leaves out the disposal fee, the walls and baffles or the manifest.
  • In Phoenix and Chandler an additive cannot replace pumping, so it does not lengthen the interval.
  • A manifest listed as an extra adds to the total.
  • A "pump only" price on a device that has not been opened in a year leaves the solids and wall film in place.
  • A missing after-hours rate means the emergency price is set at the time of the call.

The last 2 are the ones that produce the unpleasant invoice. A device that has not been opened in a year has solids and wall film, and a pump-only visit will not remove them. An after-hours call without a published rate is a negotiation at 11 pm.

04 / Good to know

The 5 minute comparison

Write the 8 fields for each quote on one sheet. Then check 3 things: is the scope identical, is the gallons number the same, is the disposal site named.

If the answers are yes and the prices are within 15 percent, the service window is the remaining difference. If the prices are more than 30 percent apart, the cheaper quote often leaves out scope, usually the wall scraping or the disposal fee.

05 / Costs

What a fair price looks like

A 1,000 gallon interceptor on a scheduled visit is $225 to $400 nationally. A 500 gallon tank is $225 to $400. A 2,000 gallon tank is $630 or more. A 50 gallon trap is $125 to $200. A quote far outside those ranges usually covers a different scope.

The cost page has the full table and the per-gallon benchmarks.

One more field worth adding to the sheet: the date of the last service. A quote for a device that was pumped 6 months ago is a different job from a quote for one that was pumped 6 weeks ago, and the price should reflect it.

Black plastic grease trap with its lid set aside beneath a three-compartment stainless steel sink, gray drain pipes running up the wall

07 / 4 questions

Questions about quotes

Still have a question?

Send the form with a short note. Someone from our team will call you back soon.

Get a call back

Q.01

Should I always take the cheapest quote?

The cheapest quote often covers less work. Quotes with the same scope, a named disposal site and a manifest are the ones that can be compared on price.

Q.02

Is a service plan cheaper?

A plan is often priced lower per visit and removes the admin work. The per-visit price and the emergency terms are the 2 numbers to compare.

Q.03

Do I need 3 quotes?

Two quotes are enough to see the range for a routine pump-out. A repair or a replacement has more variables, so a third quote shows more of the range.

Q.04

What if the quote is a text message?

A text that says "300 for the trap" lacks the 8 fields, so it is a starting point, not a quote.

White vacuum service truck with a polished cylindrical stainless tank and coiled hoses parked behind a restaurant at sunset

Form open 24/7

Ask for a call back about your grease trap

Tell us which device and which kitchen. We will call you back shortly.

Thank you. You will be called back soon.

Grease backing up?Get a call back

Before you go: want a call back?

Give your name, phone number, ZIP code and the service you need. Someone will call you back about your grease trap.

Thank you. You will be called back soon.

Get a call back

Send it, and someone calls you back soon

Add details (optional)
How urgent is it?

The form is open day and night, and we will call you back shortly.

Get a call back

Send the form and someone calls you back soon.

Thank you. You will be called back soon.